Installation of Table Legs for the Series 3000
 Hardware Included: 4 – Bolts 4 – Nuts 8 – Self Tapping Wood Screws 4 – Glides 4 – Plastic Inserts Assembly Instructions: 1. Place the table top face down on the floor. 2. On one end of the table there are pre-drilled holes. Line up the appropriate leg with the pre-drilled holes and insert the tapping screws. 3. Once the first leg is secured, then take the stretcher bar and attach it to the leg on the table with the two bolts and nuts provided. 4. Attach the other leg to the stretcher bar with the provided hardware. Tighten the bolts on both sides of the stretcher bar. 5. With the stretcher bar now attached, the leg of the table that did not have the pre-drilled holes can be secured by inserting the appropriate hardware. NOTE: You must have the leg with the pre-drilled holes in place with the stretcher bar attached to both legs before attempting to drill the holes for the second leg. |
