 Installation of Table legs for following Legs: FS2000, FS2010, FS2140, FS2145, FS2147, FS2150, FS2155
The table ships with or without Quick-mount Plates as indicated by the angle bracket on the above photo. If the optional quick-mount plate is used, slide the leg bracket into the plate and use only ONE self taping screw to attach the leg (see photo above). If the legs ever need to be removed, simply remove the one self-tapping screw and slide leg from quick-mount plate. If the optional quick-mount plate is not used, position the leg bracket as shown above approx 1.5”-2” from the edge of the table. Insert and tighten the self-tapping screw into fixed hole as with the quick-mount plate. Then insert and tighten self-tapping screw into the slotted holes (the deepest setting) on leg bracket. If the legs ever need to be removed, simply remove the one screw in the fixed hole and loosen the screws in the slotted hole. Slide leg out. |
